Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: sooperdrave on October 01, 2008, 08:36:45 AM

Title: spindle just stopped working
Post by: sooperdrave on October 01, 2008, 08:36:45 AM

i was in the middle of making a cut with my saw when the spindle just quit on me.  the spindle drive has power going to it but it isnt turning on. i have tested all of the fuses and they seem fine.
also i tested the voltage going to the spindle controll and it was fine.  any ideas?   please help!

dave

Title: Re: spindle just stopped working
Post by: Hood on October 01, 2008, 03:23:13 PM

need a bit more info, type of drive/control , hows it switched etc etc
Hood