Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: lm tooling on June 12, 2006, 11:25:08 PM

Title: conection for mach3 and Sureservo motors and drives Automation Direct
Post by: lm tooling on June 12, 2006, 11:25:08 PM

Hi people : I made a retrofit with sureservo motors,drives and ziplinks from Automation Direct. I used a Campbell desing brakeout board and Mach3 to run with pulse and direction.I jog the machine and run well to one side on all axes but slow and intermitent to the other side .Can anybody help me about this problem or send me a wiring diagram.Thanks  Luis

Title: Re: conection for mach3 and Sureservo motors and drives Automation Direct
Post by: Brian Barker on June 13, 2006, 06:51:40 AM

I will see if I can get time to draw how I had hooked mine up :)