Machsupport Forum

Mach Discussion => Mach Screens => Finished Screens => Topic started by: Overloaded on September 17, 2008, 07:49:59 AM

Title: Machind Coords "ZERO"
Post by: Overloaded on September 17, 2008, 07:49:59 AM

:)
Looking at the TurnSilverBlue.lset, the Program, Machine and Part coords don't work like they do in the other screens.
You can ZERO the Program and the MACHINE coords..... but not the Part coords.
In the standard .lset, the only way to zero the MACHINE coords is to home/ref. the axis's.
Is this the way it is intended to be ?
Can someone please verify that I'm seeing this correctly ?
Maybe the buttons are mislabeled/configured.
RC 8)

Title: Re: Machind Coords "ZERO"
Post by: DAlgie on December 31, 2008, 01:24:41 AM

Sorry, just saw your post, yes, you are correct, the coords aren't quite right in mach silverblue turn. I have never used any other screen so I didn't know how it was supposed to be, but have never gotten my machine coords to do much. Someone else who has experience with other screens will have to take a look at this, but it certainly isn't right.

Title: Re: Machind Coords "ZERO"
Post by: Overloaded on December 31, 2008, 07:23:19 AM

Thanks Dave,
   I used it for a short time. Then went to PoppaBears neat one-pager.
Just thought I'd point it out.

HNY,
RC