Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: arctec on September 15, 2008, 06:53:40 PM

Title: z axis calibration mid program
Post by: arctec on September 15, 2008, 06:53:40 PM

i am machining letters onto aluminum checker plate, and finding that my z axis is backing off slowly ( ie machining shallower ). can i include a z home/ calibration command mid program ?

g28 z0 ?

this does not seem to work, any ideas

thanks

Title: Re: z axis calibration mid program
Post by: ger21 on September 15, 2008, 07:11:15 PM

G28.1 Z0

Title: Re: z axis calibration mid program
Post by: arctec on September 15, 2008, 08:06:54 PM

thanks GER 21


works like a charm !!