Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: derek on September 13, 2008, 09:36:38 AM

Title: No Hotkey for estop in Turn
Post by: derek on September 13, 2008, 09:36:38 AM

I can't seem to find the hot key for estop in turn. It's not the same as mill.

Thanks
Derek

Title: Re: No Hotkey for estop in Turn
Post by: ftomazz on September 18, 2008, 02:57:27 AM

ESC will do

Title: Re: No Hotkey for estop in Turn
Post by: derek on September 18, 2008, 08:07:45 AM

Quote from: ftomazz on September 18, 2008, 02:57:27 AM

ESC will do

Not on mine!

Derek

Title: Re: No Hotkey for estop in Turn
Post by: Overloaded on September 18, 2008, 08:20:41 AM

Hi Derek,
You can emulate it this way. Esc key is 27.
Pick any key you want. Just be sure that it is not used elsewhere by Mach.
RC

Title: Re: No Hotkey for estop in Turn
Post by: Overloaded on September 18, 2008, 08:33:16 AM

OR.....go into Screen 4, un-check the hotkey box then re-check it. Press the same button(`) as used for Mill.
Save the changes and the "`" will be the RESET button.
Not sure why the Esc doesnt work the same way..? ? ?
RC