Machsupport Forum

General CNC Chat => Show"N"Tell ( Your Machines) => Topic started by: Steve Nuttall on June 09, 2006, 07:49:34 PM

Title: My Mills
Post by: Steve Nuttall on June 09, 2006, 07:49:34 PM

There are lots of names i see here i know from CNCZone; but there are some i don't know
So i thought well post a pic and a link for those who might not have seen my builds

(http://www.modelbarrels.com/files/offside.JPG)
My Gantry mill
33" by 14" by 12" travels; VFD spindle (3/4HP) the taper is ER25 but I have made fixed length tooling too; The entire package is self contained; the computer (Sempron 3000+) and drives (3 x Zeta4) are contained in the box behind the Gantry bridge
(http://www.modelbarrels.com/files/opside.JPG)
During construction shot
Monitor and keyboard/mouse swing for veiwing and control is of course Mach3; there is a build thread on CNCZone about this machine; and there will be a webpage too; once i find time to make it

Here is the Mini Mill web page showing how i built this machine
 webpage  (http://www.modelbarrels.com/MacineLog.html)

Title: Re: My Mills
Post by: Amnz on June 10, 2006, 12:19:48 AM

Hi Stevie(zone name) :)
I've seen and appreciated your threads many times....and will reference them many more times!
   Great work!  You are inspired!

John (bloy)
 (using Amnz in MachSupport forum)

Title: Re: My Mills
Post by: FPV_GTp on July 30, 2006, 12:00:46 AM

hi

Yes stevie  , make me jealous big time

love the work stevie does

keep up the good work

cheers