Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: rogerbsstt on September 02, 2008, 06:19:12 AM

Title: Post Processor for an FP4 Deckel CNC Mill to suit Visualm 5 or Mach3 or lazy cam
Post by: rogerbsstt on September 02, 2008, 06:19:12 AM

Hello to you all, bin a while,

but has anyone a postprocessor for an FP4 Deckel CNC Mill, I believe it runs the Fanuc system. I need it to work in Mach3, LazyCam or VisualMill 5.
Or does someone know which Fanuc Postprocessor would do the job.

Hope you can help me


Thanks

Rogerbsstt.