Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: richyrich212 on August 26, 2008, 09:40:15 PM
-
hello all,
I am in the process of installing the thc300 file set into mach3.
I have copied all the associated files and bitmaps as suggested by bob campbells installation instructions but when i run the "thc300m3" profile I have no screens or buttons!!!
Am i doing something wrong??
thanks in advance for any help
-
Sounds like they are in the wrong directory, can you attach the screen set you are using and also say which buttons you cant see and I will see where they should be.
Hood
-
Hood is there a directory map any where? sometimes I get it messed up to...
-
Make sure you go to views and choose which screenset you would like Mach to use(thc-300xx). I encountered the same thing. After installing the THC-300 screenset and you re-start, everything is blank.
-
Hood is there a directory map any where? sometimes I get it messed up to...
Custom screensets can have there own locations for storing the bitmaps etc, the standard stuff is in Mach3\Bitmaps. If you have a screen that you dont know where to put the bitmaps you can open the screen set with screen4 and double click on a button and you will see the path for the image.
Hood
-
Make sure you go to views and choose which screenset you would like Mach to use(thc-300xx). I encountered the same thing. After installing the THC-300 screenset and you re-start, everything is blank.
wlarry -=- that was my issue thanks for the info !!!