Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: wlarry on August 24, 2008, 01:59:57 PM

Title: Mach screens - THC-300 set - something went funky
Post by: wlarry on August 24, 2008, 01:59:57 PM

As usual, fixing one issue caused another.  My A axis of my gantry is intermittantly loosing steps and only when travelling in one direction.  Initially had a lot of PC problems optimizing to get mach happy. So I upgraded to a Dell Optiplex 260.  I installed mach (latest version - tested) and the THC300 bitmaps and files.  When I open the THC300 set, the screens are missing buttons.  The program screen is missing the e-stop reset button, reference home keys and other screens are missing keys as well.  Tried to reinstall a couple of times - no change. Made sure thc bitmaps were coppied into bitmap directory - no  luck  Worked ok on the last system ? Anybody have any thoughts ?

Title: Re: Mach screens - THC-300 set - something went funky
Post by: Hood on August 24, 2008, 03:44:05 PM

Can you attach your screenset to this post, I have just had a look at the screen I have in screen 4 and it looks like maybe the path for the bitmaps are wrong so I would like to compare to yours.
Hood

Title: Re: Mach screens - THC-300 set - something went funky
Post by: wlarry on September 02, 2008, 11:39:52 AM

Thanks for the help Hood.  I did a re-install of MACH and everything seems to be behaving.  Can't explain what went on.

Thanks everybody for your help.