Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: amas leong on August 11, 2008, 12:57:16 PM

Title: Need tip on cutting path line by using Knife??
Post by: amas leong on August 11, 2008, 12:57:16 PM

Hi Guy, Need Tip, is anyone know, how it work.?

I  build a CnC Machine which need to Cut soft Paper form Broad about 5mm Thick. & is using Cutter Blade. which need to following
the Path-Line, which mean the Blade will Rotate by control the step motor.- following the Path line?

or Cutting 90 or 45 degree, the Blade will rotate to 90 or 45 degree & step down to do the cutting. is Mach3 can do it?
Just like .....Zund Packing Cutting Machine.

Any Tip & Advice?

Amas

 

Title: Re: Need tip on cutting path line by using Knife??
Post by: ger21 on August 11, 2008, 01:36:29 PM

I don't know how to set it up, but yes, mach can do that using it's tangential function to keep the knife aligned with the cutting path.