Machsupport Forum
Mach Discussion => Mach SDK plugin questions and answers. => Topic started by: hpghost on July 23, 2008, 01:55:09 AM
-
hi,
the wizard for 3d scanning is good, however going up and down all the time is slow.
does anybody has developped a wizzard which would work as follows:
- start of scan at z depth.
- when probe detects touch, then it raises Z till end of touch.
- move X or Y step.
- if no touch then move Z down till touch
- then up one setp back and X or Y+
and so on?
to do this the probe shall be able to detect lateral contacts but I beleive it would be much faster way of scanning...
if this exist please let me know where to find the code!