Machsupport Forum
General CNC Chat => Show"N"Tell ( What you have made with your CNC machine.) => Topic started by: jwlrymkr on July 19, 2008, 07:26:20 PM
-
Using a Minitech machine and Mach2
(http://www.3dcadjewelry.com/3stone1.jpg)
(http://www.3dcadjewelry.com/3stone2.jpg)
(http://www.3dcadjewelry.com/earrings.jpg)
(http://www.3dcadjewelry.com/filigree1.jpg)
(http://www.3dcadjewelry.com/ring1.jpg)
Regards,
Ken http://www.3dcadjewelry.com
(http://www.3dcadjewelry.com/Richard_finished.jpg)
(http://www.3dcadjewelry.com/IP1.jpg)
(http://www.3dcadjewelry.com/IP2.jpg)
(http://www.3dcadjewelry.com/IPRing.jpg)
(http://www.3dcadjewelry.com/Ring1.jpg)
Regards, Ken http://www.3dcadjewelry.com
-
Oops, thats Mach3, sorry.. Typo
-
One more for now...Using VisualArt to create the picture files.
(http://www.3dcadjewelry.com/tpic.jpg)
Ken
http://www.3dcadjewelry.com
-
ummmm......wow. What is the typical machine time of a ring like the Iron Pig? I had a look at your site. Outstanding work from all of you.
-
Thanks Sam, Typical machine time in wax on a rotary is probably about an hour and 1/2.... 3 sided jobs normally take at least 3 hours...Wax is pretty soft and I normally run about 800 mm/min.
-
Brilliant work and brilliant workmanship !