Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: mwdubs on June 30, 2008, 03:35:19 PM

Title: unknown movement in mach 3 using Turbo cad/cam v11
Post by: mwdubs on June 30, 2008, 03:35:19 PM

when i take my g-code generated from turbo cam to mach3 there is a movement made that dosent exist within the code, its like a phantom move, has anyone ever seen anything like this before.

Title: Re: unknown movement in mach 3 using Turbo cad/cam v11
Post by: Overloaded on June 30, 2008, 04:07:35 PM

Could you attach a copy of your code ?
Or at least, the section of the code with an indication of where the PHANTOM move occurs ?
Thanks,
RC

Title: Re: unknown movement in mach 3 using Turbo cad/cam v11
Post by: mwdubs on June 30, 2008, 04:43:32 PM

Sorry, I just saw the error, the G54 had the wrong offsetts called out. Wasnt a phantom move after all, just in a hurry
thanks for the concern