Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: timothysvec on December 06, 2005, 01:57:20 PM
-
Where is the motor reversal box located? Mach2 has it in configuration…….
I love mach2 but wanted to stay up to date and use mach3. do i have to switch the wires on my drives?
Cheers,
Tim svec
-
They are in the config--> homing/limits, there is a column that says reversed, you can add a checkmark to the ones you want reversed.
Hope this helps
Fernando
-
The other way to change this is under the ports and pins Active Low setting for the Dir pin on that axis...
Hope that helps
Brian