Machsupport Forum
G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: kevoler on June 18, 2008, 01:19:24 AM
-
I can export gcode on a square or rectangle and have it work with lcam but when I import a dxf with circles in it the gcode goes all weird in Mach 3. Help someone
-
Hi, kevoler
Use the REPLY button hear and attach your example DXF file
Thanks, Chip
-
Here is the dxf file and the tap file which Lcam created.
-
Hi, kevoler
I loaded your dxf and posted it, It looks fine hear, See below.
What ver of Mach & LazyCam are you using, Look under Help, "About" in both.
Using Mach R3.041 & LC 3.00.2 hear.
Let Us Now, Chip
-
Hi Chip,
I downloaded your tap file and it works great. Here is what mine looks like. I will keep at it.
-
I downloaded and installed the newer versions and all worked great. Thank you for your time
-
Hi, kevoler
I think it might be the "Default Plasma Post", Try the "Default Mill" post and see if thats it.
Thanks, Chip