Machsupport Forum
Mach Discussion => VB and the development of wizards => Topic started by: newtocnc on June 08, 2008, 03:43:04 PM
-
hello everyone
Is there a like isBusy() command in VB.
when I do refresh like REGEN the toolpath tru VB.
I can not read some of the dro's.
If I single step No problem.
Thanks.
-
Ther is a command to see if the machine is moving..
DO WHILE ISMOVING
REM * DELAYS THE CODE UNTILL PRIOR g MOVEMENT IS COMPLETED
LOOP
Good?
Ray