Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Marchantdice on May 29, 2008, 10:10:21 AM
-
I'm looking to manufacture a welding machine (spot welding), is there a function in Mach to triger the on / off function?
Many thanks, Regards / Kevin www.worldofcnc.com
-
You could use the Coolant relay signal, that way M8 would switch it on, M9 off. If you didnt want to use M8/M9 you could write a custom macro and call that from the code.
Hood