Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: atanq on May 23, 2008, 03:39:33 PM
-
Hi,
I have mach3 on xp, which method is best to drive an external relay to switch the plasma on/off? Is it in ports & pins> output signals> digial trig?
Thanks,
aaron.
-
Probably best to use the spindle relay output, that way you can start with M3 and stop with M5
Hood
-
Thanks for the reply, Hood,
I'll give that a try - it seems to work quite happily in the MDI. Will I be able to select this option for instance when importing a file from LazyCAM into Mach3?
Thanks,
Aaron.
-
Dont use LazyCAM but I am sure it will call M3 for spindle Start and M5 for stop when you generate the code.
Hood