Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Jimmy H on May 18, 2006, 07:54:53 PM

Title: Cant find any import commands in Mach3
Post by: Jimmy H on May 18, 2006, 07:54:53 PM

I know in Mach2 it was very obvious and under the FILE menu.

Using version 1.9 of Mach3 and there is no import option under the FILE menu.

Jimmy

Title: Re: Cant find any import commands in Mach3
Post by: sshneider on May 18, 2006, 11:11:17 PM

Yeah, 1.9 is kinda new for all of us in that respect.  Version 1.84 has an import function under the file menu.  In 1.9 you use Lazy Cam to do the import and generate the code.

HTH,
Sid

Title: Re: Cant find any import commands in Mach3
Post by: Jimmy H on May 18, 2006, 11:31:43 PM

Kinda thought that might have been the case. Even looked at lazy cam..but couldnt figure it out.
Im just in the process of calibrating my router.

I went ahead and went back to 1.84 to keep in the comfort zone.

Jimmy

Title: Re: Cant find any import commands in Mach3
Post by: Brian Barker on May 19, 2006, 11:43:04 PM

There will be video's on Lazy Cam but it is going to be after I do a few bug fixes.... Art and I are going to each do a video, This should help you get you the point where you can run Lcam.

Thank you and sorry for the trouble
Brian

Title: Re: Cant find any import commands in Mach3
Post by: Jimmy H on May 22, 2006, 09:50:21 AM

no apology necessary...this software is great and still work in progress.

I really appreciate what all of you have done here.

Looking forward to the videos

Jimmy