Machsupport Forum

Mach Discussion => Mach Screens => Topic started by: Tarak on May 18, 2008, 09:42:07 PM

Title: Jog Buttons won't work on one of my screens..........hmmmm
Post by: Tarak on May 18, 2008, 09:42:07 PM

Any idea why for some reason the jog buttons (arrows on keyboard) won't work on one of my screens?
If I start Mach, enable drives, Home machine, the check Jog Enabled is On and set to either Step or Continuous, it just won't move, but if I load another screen, without changing anything else. The jogging works correctly.
I remember having this a while ago, I ended up giving up and restarting the screen, but the screen I've got now, I've been working on for about 2 months, there's ALOT of code in it.
So preferably I'd like to try to figure out how to fix it, rather than copy/paste.
Thanks.
Darc

Title: Re: Jog Buttons won't work on one of my screens..........hmmmm
Post by: poppabear on May 18, 2008, 10:41:34 PM

If you want, send the screen to me, and I will see if I can find the issue........

state the page the issue exist on too.

NOTE" there HAS to be a jog button with LED on a page that your trying to jog from

Title: Re: Jog Buttons won't work on one of my screens..........hmmmm
Post by: Tarak on June 01, 2008, 07:21:42 AM

Well, I finally found out what is happening, the problem only rears it's ugly head when the JOG ON/OFF is set to "Display on all screens"
It's good to finally know what's going on.