Machsupport Forum

Mach Discussion => Mach Screens => Screen designer tips and tutorials => Topic started by: fixittt on May 06, 2008, 01:21:19 PM

Title: 640x480 screen set......
Post by: fixittt on May 06, 2008, 01:21:19 PM
Is it possable to make a 640x 480 screen set?  I have a small LCD panel that I got for $7.  It of course wont do any resolution above that.  I have very limited space and having just the needed buttons I use would be a great space saver!!!!!!
Title: Re: 640x480 screen set......
Post by: poppabear on May 06, 2008, 01:50:18 PM
Yes, use flash it would be a better fitting screen, or
In screen 4, open up a "New" screen, it has a radio button for custom size, put that in, and design your screen on it.

scott
Title: Re: 640x480 screen set......
Post by: fixittt on May 06, 2008, 03:29:07 PM
got it going........  had to tinker with the screen alot   but it works and it works great!
I know the screen pic is blurry sorry bout that.......

The setup......

Dual monitors one is a 17 inch sits off in the far right corner of my bench,  the mill is on the far left corner.   The keyboard and mouse are both wireless so they move easly.   The monitor is something I picked up at a flea martket for $7  Its a 12 volt screen so I have it powered off of the Pc`s power supply.   I can see and all the functions clearly.  And its not hard at all to click the buttons,  now if it was touch screen.   Ohh man!