Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: fer_mayrl on May 15, 2006, 11:28:05 PM

Title: PLC capabilities
Post by: fer_mayrl on May 15, 2006, 11:28:05 PM

Art,
Have you ever thought of making Mach3 have PLC capabilities, or make a stand alone software capable of doing this?
I have yet to see a decent software based PLC controller.
Best Regards
Fernando

Title: Re: PLC capabilities
Post by: Brian Barker on May 17, 2006, 09:52:55 PM

The VB is what we use to do this.... IT is not ladder logic but...

Title: Re: PLC capabilities
Post by: fer_mayrl on May 17, 2006, 10:56:11 PM

I see... maybe its just that I dont know much about VB, and sometimes I cant see to find a way of doing in VB what can be done on ladder logic, but what do i know...
Thanks Brian, helpful as always
Fernando

Title: Re: PLC capabilities
Post by: Brian Barker on May 18, 2006, 07:03:03 AM

If you getto somthing that you can't do just post it and we will see what we can do :)

Title: Re: PLC capabilities
Post by: fer_mayrl on May 18, 2006, 11:36:07 AM

Thanks Brian,
I know I can count on you
Fernando