Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: M250cnc on April 29, 2008, 11:59:14 AM

Title: I Bought My Motor Invereter Package From Therse Guys In The UK
Post by: M250cnc on April 29, 2008, 11:59:14 AM

As title, they were very good on price.

But more importantly the guy in their service dept was very patient with me getting the inverter to work the way i wanted

"If The inverter Trips Into Overload It triggers An EStop in Mach"

So i would heartily recommend them if you are looking to buy and are in the UK.

http://www.inverter.co.uk/

Phil_H

Title: Re: I Bought My Motor Invereter Package From Therse Guys In The UK
Post by: wantcnc on April 29, 2008, 02:43:19 PM

another good place is Newton Tesla, family run, they often setup the inverter if you tell them what motor is on the other end
I have bought 2 sets from them so far (motor and inverter) and an extra motor, all for good pricing and loads of support when you need it

http://www.newton-tesla.com/


no connection with them just a happy customer