Machsupport Forum

Support => Forum suggestions and report forum problems. => Topic started by: BigZ on April 20, 2008, 03:23:17 PM

Title: Slaved Motors different speeds Homimg/Verifiying ONLY
Post by: BigZ on April 20, 2008, 03:23:17 PM
I have been using my machine with slaved X axis for 2 years with no problem.

I am now running Mach3 3.041. My machine works fine and doesnt lose steps at any speed range. Untill I home or verify then one motor is definately faster than the other. Any ideas would be appreciated?

Regards

Liam
Title: Re: Slaved Motors different speeds Homimg/Verifiying ONLY
Post by: BigZ on April 20, 2008, 08:29:23 PM
Problem fixed. Handn't saved the A axis setting to match X.DOHHH