Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Vmax on December 01, 2005, 07:38:54 AM
-
Brian are the NEW wizards available for download yet? Thanks Terry Parker
-
It looks to me that we will have it ready for Monday. There have been many changes and many new things added in. So to keep every one happy i have Rob running all of the wizards and shapes tomorrow. I am in hopes that he is happy and keeps my work load down :) Russ will be doing the last of the new graphics and we are on the way!
Once it is ready i will have it added to the download section of NewFangled. I will post here as soon as it is uploaded.
Thank you and happy Chips!
Brian
-
The New wizards are now in the latest download of Mach3 :)
Sorry we didn't have them out sooner, But we did have Rob testing everything ;D
Thank you
Brian
-
Thanks Brian. Have you ever thought about a rigid tapping wizard??? Terry Parker
-
I can set up the Drill wizards for taping but it will not be rigid taping... Mach3 can not rigid tap, but you can run a floating tap holder and tap.
What I will do is add in a setting for tap and have a dialog box pop up with a few questions that you will have to answer.
Thank you for the input
Brian
-
Brian that would be perfect. I do a lot of drilling and tapping. Thanks Terry Parker
-
It will be in the next version :) (I am thinking by the end of the week)
Thank you
Brian