Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: tclark on April 14, 2008, 06:23:51 PM

Title: reverse run
Post by: tclark on April 14, 2008, 06:23:51 PM

When I hit "Feed Hold" and then hit "Reverse run", my head goes in a totally different direction (sometimes off the beaten path!)

Any help?

Thanks

Title: Re: reverse run
Post by: Tarak on April 25, 2008, 02:04:09 AM

Hi tclark, I have the exact same problem on every Mach machine I've built (5 to date).
I gave up trying to use reverse run a while ago.
Darc

Title: Re: reverse run
Post by: tclark on April 25, 2008, 08:56:55 AM

Thanks for the feed back.  Thats a shame.  I wish it worked.  At least it's not just ME being stupid!!
Wish it was though because I need that feature.

Title: Re: reverse run
Post by: mjtooba on February 12, 2010, 03:22:11 PM

i have this problem too

Title: Re: reverse run
Post by: zealous on February 13, 2010, 11:00:00 AM

After the Feed hold issue a Stop command and it should work fine

Title: Re: reverse run
Post by: manmeran on May 11, 2010, 04:32:01 AM

hi Guys
recently i use plasma and I very much need use reverse run. i read much post in net, and
I reached the conclusion that : "reverse run dont work very well"
Beforehand, I apologize for judging If incorrect.
If we use run reverse, we will not be lost step  ???

thx
amir

Title: Re: reverse run
Post by: manmeran on May 12, 2010, 11:14:31 AM

no body ?

Title: Re: reverse run
Post by: manmeran on May 13, 2010, 03:02:25 AM

Why none of the Moderators do not respond?
This is an important.
My idea for "PAUSE".
When the pause button is pressed, for example the middle of a line, continue program to end line ,then act Pause button .
This idea is not lost no step.
Whether it is feasible ?

Title: Re: reverse run
Post by: Hood on May 13, 2010, 03:28:58 AM

As said when you sent me a private message, Reverse Run does not work in Demo mode.
Hood

Title: Re: reverse run
Post by: manmeran on May 13, 2010, 03:33:22 AM

yes Hood.
but :
http://www.cnczone.com/forums/showthread.php?t=103133 (http://www.cnczone.com/forums/showthread.php?t=103133)
this is a problem almost for all

amir

Title: Re: reverse run
Post by: Hood on May 13, 2010, 03:37:31 AM

 I dont recall seeing any people mentioning it on this forum so possibly that is a Tormach issue as they use an old version of Mach.
Hood