Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: suthy on April 10, 2008, 07:02:11 PM

Title: nothing is working
Post by: suthy on April 10, 2008, 07:02:11 PM

Hi

New to cnc

I,ve had mach3 running a romaxx using the demo version fine until i got the full version, now i can't get anything working even though my settings are the same

Title: Re: nothing is working
Post by: Hood on April 10, 2008, 07:13:02 PM

make sure you have the correct port address set
Hood