Machsupport Forum

Mach Discussion => Mach Screens => Finished Screens => Topic started by: Ben on March 28, 2008, 09:26:41 AM

Title: TurnSilverBlue.lset screen is black
Post by: Ben on March 28, 2008, 09:26:41 AM

On one computer it works fine but the shop computer the whole screen is black except the reset led and the click areas are there but no graphics. I've used the same xml file. What should I check? Thanks, Ben

Title: Re: TurnSilverBlue.lset screen is black
Post by: Graham Waterworth on March 28, 2008, 12:50:34 PM

Check you have all the icons/screens in the correct directory within Mach3.

Graham.

Title: Re: TurnSilverBlue.lset screen is black
Post by: Ben on March 28, 2008, 01:38:38 PM

Thanks Graham, I had opened the zip in the wrong directory. Ben

Title: Re: TurnSilverBlue.lset screen is black
Post by: backyardcnc on March 31, 2008, 02:54:30 AM

So what is the "right directory"? I have downloded this screenset for MACH3TURN and the MANUAL/TOOL screens are normal and the AUTO and DIAG screens are mostly black. When I ran the initial file it said that it was corrupted. I downloaded again but still the same. It sure looks nice though and I would really like to get a working version!

Gerald

Title: Re: TurnSilverBlue.lset screen is black
Post by: backyardcnc on March 31, 2008, 03:05:09 AM

Forget my last post, solved the problem. Downloaded again fr 3rd time and install went AOK and all screens work! Sure looks nice!

Bet my lathe makes much nicer chips now............


gerald ::)