Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: dnorton77 on March 25, 2008, 11:02:19 AM

Title: z axis
Post by: dnorton77 on March 25, 2008, 11:02:19 AM

 Thanks I reset the de bounce at 1000 and that seemed to fix the problem and also made the z axis work alot smoother, A GREAT IMPROVEMENT!

Title: Re: z axis
Post by: Chip on March 25, 2008, 03:35:51 PM

Hi, Dnorton77

Glad it Helped, What was it set to Before ?

Thanks, Chip