Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: chucky on March 21, 2008, 07:35:56 PM
-
I have a button in my skin set that has this code that worked in version R3.037 but in version R3.038 it just sets there.
Any help would be appreciated.
zdown = GetUserDRO( 1120 )
code "G83Z" & zdown
-
I just made a screen with that DRO and OEM and when I loded it there was a number already in the DRO, this suggests that maybe something is using that OEM already. I changed the DROs OEM TO 1666 and same in the VB and its working. Try changing the DRO OEM to some other number and see if it works for you.
Hood
-
I do not think it has anything to do with the DRO’s because these will not work neither.
code "G73Z-.2500"
code "G81Z-.2500"
code "G83Z-.2500"
The Z will move down to 0.0000 and stop.
They do work in Version R3.037 but not in Version R3.038
EDIT
The Code will work if you enter the code in the MDI line but not from a VB button in Version R3.038
-
Brian, on the yahoo forum: "I have put Rev 3.039 online ... I have found an other error in the VB and would like to know if this will fix some of the trouble that we are seeing."
-
That did the trick
thx
-
I have an AHHA controller. The DOS computer gave up, so it is time to upgrade. I have Windows 7 and need to know how to connect the 37 pin connector to the new computer using Mach3?