Machsupport Forum
G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: santiniuk on May 09, 2006, 05:45:09 AM
-
Hi all,
Would someone please post a sample of GCode for the Mach3Turn program.
While we are doing the MachBlue turn screenset I'm not sure if the toolpath is displaying and updating correctly.
Thanks !
Shaun
-
There are wizards in turn that you can use to make code :)
-
::)
Well that shows my lack of knowledge with the Turning module.
Thanks Brian, I didn't know they existed.
Cheers
Shaun