Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: ayhan on February 24, 2008, 06:52:14 AM
-
Hello,
I need to move axis B as cumulative.
My B axis is indepentent (work as weld wire-feeder) , should not come back and in every loop , should move plus .
like 1+1=2 , 2+1=3 , 3+1=4 ???
What sould I do ?
Thanks
Ayhan
-
G91 B1. will always feed 1. more in plus direction for last position.
Graham.