Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: richardpiper on January 19, 2008, 03:12:37 PM
-
There seems to be no 'post code and exit' button in the 'Write' wizard screen.
So how do I get the code after I have entered then text and parameters?
Thanks
Richard
-
Richard,
I just hit the Write button and wait a second and it posts the code.
RC
At times, click write.. then click return to Mach3.
-
Richard,
I just hit the Write button and wait a second and it posts the code.
RC
At times, click write.. then click return to Mach3.
Thanks for that, I tried it but nothing happens. I tried a few other wizards, they all seem to work OK.
I must be missing something. I REALLY WISH there were simple help files for these things!
Richard
-
Strange................Works here every time.
?? ??,
RC
-
Try hitting the Enter(return) Key on your keyboard, it should work with the on screen one though.
Hood
-
Hood,
Could this reqiure the lic. file ?
Richard,
Do you have the lic.?
-
Shouldnt do as its just a Mach wizard written by German Bravo (I think) and not one of the NewFangled addons that require a seperate licence.
Hood
-
Hi,
Something that is easily overlooked when using the Write Wizard for the first time on a new installation of Mach is to click on one of the direction buttons. If you don't then the only GCode you get on the Mach screen consists of Z moves only, everything else is 0.0000.
Tweakie.
-
You have to make sure that EVERY option is selected, or the Write wizard won't work. Carefully go over the entire screen and make sure you don't miss anything.
-
:)