Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: sanlee on January 18, 2008, 04:58:41 AM
-
I am desiginig PCB in Protel software. This can generate gerber files of PCB. I want to milling it using Isolation method. I have 3-axis CNC machine controlled by MACH3. Is there any procedure to convert protel gerber file to mach3 code?
Thanks
Sanlee
-
Hi, I dont know if this is what you need but heres a link.
http://sourceforge.net/projects/gerbertogcode
-
Hi, Sanlee
Hears a little info on LazyCam posts of gerber file's
http://www.machsupport.com/forum/index.php/topic,5412.0.html
Thanks, Chip
-
Hi Sanlee,
This bit of software does what you want, I have used it a few times, but with CNCpro and not Mach3. However the Gcode will work in Mach3 I am sure.
www.imsrv.com/deskpcb
Tx Friedrich