Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: GoFaster on January 09, 2008, 10:02:57 AM
-
Hi -
I'm a new Mach3 user (version R3.00). I've been setting up limit/home switches on my X2 mill - when I jog to a limit and trip the switch, motion stops as expected. However I can't jog off the switch. There is supposed to be a "Auto Limit Override" checkbox in the General Config page but for the life of me, I can't find it. Can I get a clue please? :)
-
Have a look on the settings page, used to be ther anyway.
Hood
-
In Turn it's in the diagnostics screen just looked at Mill & its on the top left hand side of the Settings screen.
Tony
-
Thank you! I found it and the Override Limits selection in the Settings screen.
Have to work out some issues with the CNC4PC breakout board bit otherwise the system is running great!