Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: dgalaxy on January 07, 2008, 09:25:15 AM
-
This might be a dumb question but my jog continuous speed cooks i can change percentage and works fine i cant seem to change my step speed in jog mode
i kind of want that to go a little faster. I'm working on a project and drill many holes at 1 inch apart and it is so easy to use step mode
just wish i could kick up the speed a little. I'm sure there is just a setting I'm missing maybe some body could shove me in the right direction
John
-
AH HA i changed the feed rate in the run screen and that will change the step jog speed.
John