Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: poppabear on December 31, 2007, 04:47:03 PM

Title: TCP Modbus I/O organizational documents for your use...........
Post by: poppabear on December 31, 2007, 04:47:03 PM
I am working on a Large Machine with alot of TCP/Modbus I/O.  I had to track alot of info on what was what, and where it went and what it did.

So, I made a MS Word TCP Output Mapping document and a TCP Input Mapping document. Both are set up as tables and are editable for your use. Just Change the information at the Top to reflect your situation. The one I put up is for using 2 PLC's one for input and one for output.

The system shows the flow of data going in to mach and out from mach, as it travels to and from: The PLC, Mod Bus, Brains, Macropump (if applicable), Functional discription, and Data/Target Page.

It could easily be adapted for Serial Modbus, or just "Record keeping" on your systems I/O.

they are attached as a Zip called:  TCP_IO.zip

Scott
Title: Re: TCP Modbus I/O organizational documents for your use...........
Post by: Chaoticone on December 31, 2007, 07:19:27 PM
Thanks Scott.

Brett