Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Leeway on December 25, 2007, 03:04:17 PM

Title: Mach loading digits in DRO's @ startup. X & Y
Post by: Leeway on December 25, 2007, 03:04:17 PM

This is weird and I don't recall it happening for some time. I have three different computers that run XP Home. I am getting some numbers in my DRO's on startup. All three machines and even different versions of Mach 3. I would think it has to be a setting in Mach 3, but not sure where to look. I have persistant jog on, but no saving offsets and no persistant offsets, dro's or feedrate overide. Not using machine coordinates nor software limits.
Nothing I can think of.
The numbers are -2.5500 in the X dro and -3.4420 in the Y.
Not that big a deal really, but it may help pinpoint some other trouble I have been experiencing.
Thanks.

Title: Re: Mach loading digits in DRO's @ startup. X & Y
Post by: Leeway on December 26, 2007, 06:46:12 AM

I haven't actually figured it out, but when I opened just the standard mach 3 mill, this did not occur. Obviously it was some setting I fiddled with without realizing it. I just created a new profile and the issue went away. Good riddance. ;)