Machsupport Forum
Mach Discussion => Mach Screens => Finished Screens => Topic started by: poppabear on December 24, 2007, 10:10:48 AM
-
Here is the Re-uploaded "Quick Threads" Wizard, (
I built a Lathe Threading Wizard called "Quick Threads", you can do Multiple threads, clearances, directions, hands...etc.
I added that nice little "Free Ware" Thread calculation Wizard that was posted up here so You can have an easy access Thread form calculator chart!! It has a Help file for how to use it, please read the "Read Me 1st".
I hope you like it, tell me what you think,
Scott S.
-
Well I like it.
I don't suppose it's possible to do a wizard for roughing and finishing a profile, in diameter mode, plus a thread, is it............... please? ;D
Jim..
-
There already are some roughing/finishing wizards for just that, run one of them first then run the threader.
scott
-
here is an updated screen set, with more muted colors, by request. also bug fixes for metric posting.
scott
-
Hi Scott,
I'm just getting started with cnc threading and your new wizard seems like a good starting point.
One dumb question to start with... How do I change a value on one of the wizard screens? If I highlight a field, I can change the value, but as soon as I select another field the value reverts to it's default. I'm doing something silly, please enlighten me...
When I load the wizard the field values are displayed in a yellow font on a bright green background. Its kind of difficult to read. Is there an easy way to change this?
Bob
-
Hi Scott,
It looks like I pulled down v2 with the non-muted colors. I'll pull down V3 and try again.
Still haven't figured out the change settings silliness...
Bob
-
I wish I had a buck for every time that problem has appeared here. After you enter a value you must press the ENTER key, if you click into another box mach assume you really didnt mean to change the value.
-
Where do I copy this .set file to make it work?
-
If you want it to appear as a turn wizard then it goes into the c:\Mach3\TurnAddons\QuickThreads. It will then appear on the list of wizards shown by the menu item for wizards.
-
Thanks Ron, for answering that, appreciate you my friend!
scott
-
Hi! Is any tutorial video avaible in YouTube or another site? I don't find it
Regards
-
How do I use MDI and motor tuning with this screenset?