Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: mdash on December 20, 2007, 02:41:26 PM

Title: Offsetting using Plasma post with G41/G42
Post by: mdash on December 20, 2007, 02:41:26 PM
I have a dxf that if I bring in and use the mill mode, posts fine.
It outputs the G41 and G42 offsets with the tool chosen.

However, if I try to get it to do this using the plasma mode, I get no G41 or G42s.

It is possible to specify a kerf in the Plasma mode?