Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Whacko on December 19, 2007, 05:48:22 PM

Title: Gamepad FRO incrementing
Post by: Whacko on December 19, 2007, 05:48:22 PM

I'm using a gamepad with two buttons used as increment/decrement the FRO using Keygrabber and OEM Button codes 108 and 109. But I cannot find where to change the increment/decrement value. It stays fixed on 10%. I'm missing something, I have tried DRO's as per documentation, but there is not enough information. Another question, What is OEMButton's 100 and 101 for? It is called Inc Inc Up and Inc Inc Down. I've been Incing on them and watching DRO's I have added that I thought might be relavent, but alas, the incing is evading me!

Whacko in trouble

Title: Re: Gamepad FRO incrementing
Post by: Hood on December 19, 2007, 06:05:26 PM

I have this on my lathe, use  a Brain to control them so I can keep them pressed and it will  go up or down depending on which button was pressed continuously. Will go see what I have in the Brain as the OEM.
hOOD

Title: Re: Gamepad FRO incrementing
Post by: Hood on December 19, 2007, 06:09:25 PM

Oh dont have it on this computer :( working away tomorrow again so wont be able to look tomorrow either :(

Hood

Title: Re: Gamepad FRO incrementing
Post by: Whacko on December 20, 2007, 01:42:48 AM

Thanks Hood,

I could implement them through VB but still don't know what they meant for originally.

Whacko for info