Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: dikkieduk on December 08, 2007, 01:27:39 PM

Title: Homing direction problem
Post by: dikkieduk on December 08, 2007, 01:27:39 PM

Hi All,

I would like to reverse my homing direction.

When i the check/uncheck the reverse-option in homing/limits :  this automatically changes the (plus/minus)  direction of the axis.

Is there a option to change my homingdirection without changing axisdirection as well?




Kind Regards

 

Title: Re: Homing direction problem
Post by: Hood on December 08, 2007, 02:08:02 PM

Check/uncheck the Home Neg option.
Hood

Title: Re: Homing direction problem
Post by: dikkieduk on December 08, 2007, 02:22:22 PM

Hi Hood, will try this tomorrow; let you know

Title: Re: Homing direction problem
Post by: dikkieduk on December 09, 2007, 04:14:08 AM

Hood ;this did the job
Silly really , kept me busy for hours  , must have checked/unchecked it myself, several times.

thanks again

Title: Re: Homing direction problem
Post by: Hood on December 09, 2007, 08:09:15 AM

No problem, and if it wasnt for doing silly  things like this we would have too much time on our hans :D

Hood