Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: stringkilla on April 18, 2006, 08:45:26 PM

Title: Eureka I'm Cutting
Post by: stringkilla on April 18, 2006, 08:45:26 PM

I have finally cut my first chips. I have got to give Brian Barker my deepest appreciation and gratitude for his help in configuring my machine in Mach 3. It has been almost 1 year since I purchased my machine and Mach Control Software. I know many of you have read My 2 Cents post and know I just got in over my head. This forum and it's members have been supportive and very helpfull to me in a one to one spirit Once again THANK YOU BRIAN.

Title: Re: Eureka I'm Cutting
Post by: Brian Barker on April 19, 2006, 08:03:04 AM

Great I am happy to see that you are happy and making chips  ;D

Happy cutting!
Brian

Title: Re: Eureka I'm Cutting
Post by: ynneb on April 19, 2006, 09:08:16 AM

Post a picture of some of your first cuts.

Yeh, we would be quite lost without Brians help here.