Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: gjsrv4 on November 30, 2007, 03:46:42 PM

Title: newbee looking for hands on help phoenix with cnc router
Post by: gjsrv4 on November 30, 2007, 03:46:42 PM
Hi
I have a home brew cnc router with 270 0z,cnc4pc breakout board. I have loaded a DXF file from autocad to lazcam to make a router mount for this machine. when I run the Gcode though mach3 mill I get difrent rezultes each time i run it. an it's not due to losing steps!

Is there anyone out in the Peoria or Phoenix area that would willing to help me get running!

any help would be greaty appreciated!
Glen 623-826-0895
Title: Re: newbee looking for hands on help phoenix with cnc router
Post by: crsatter on October 26, 2008, 01:45:11 PM
I am new to CNC and am in Peoria. I am having problems setting up Mach3. Any chance you may be able to help?