Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: wld99 on November 27, 2007, 08:54:33 PM
-
Mach 3 mill on a converted Bridgeport... mill & Mach 3 working fine. I would like to talk to someone about doing some programing. Taking AutoCad file to m codes. They are not complex, we have lost our employee and need a little help.
Thank you
William Day
wld@framingsupplies.com
-
You said m codes, but did you mean g code file.
I can use OneCNC mill to convert your drawind to a G code file, but I would need to know your material, your tools you want to use for the project and what they are made of, your max spindle speed as well, and if you have coolent.
Scott