Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Splint on November 27, 2007, 07:05:43 AM

Title: Ports & Pins info for Rutex 2120 motherboard?
Post by: Splint on November 27, 2007, 07:05:43 AM
Hi guys,

I've had a Rutex 2120 motherboard and 2010 driver cards for a while now and I can't locate any documentation for the port and pin allocations to get Mach 3 running the motors. I went to the Rutex web site but apparently I don't have permission access the downloads area so I cant get the information from there and Vlad is no longer able to offer assistance. The cards run ok with the tuning software from Rutex but there's no information there regarding port and pin allocation. Anyone able to provide the details?

Cheers
Splint
Title: Re: Ports & Pins info for Rutex 2120 motherboard?
Post by: ynneb on November 27, 2007, 07:35:25 AM
Dave, I notice there are a few pdfs for Rutex if you enter via a google search.
Does this one help ? http://www.rutex.com/pdf/R2000bdi.pdf
Title: Re: Ports & Pins info for Rutex 2120 motherboard?
Post by: Splint on November 27, 2007, 08:14:53 AM
Thanks Ben,

the document you linked to didn't have it but I found some earlier model (R991H) documents which should be enough to get me going.

Cheers
Splint