Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: gbecerra on November 07, 2007, 03:14:28 PM

Title: LazyCam=>MACH 3 need help
Post by: gbecerra on November 07, 2007, 03:14:28 PM

Hello
My problem is that I can only import 50 cutting points to MACH 3 from LazyCam. When I export the DXF file into LazyCam the cutting path shows correctly but when I export the LazyCam File (G-Code) into MACH 3 it shows incomplete. The pattern I have found is that I can only export 50 cutting points in to Mach 3. So, cutting paths greater than 50 points are not exported into MACH 3.

The version of I am using is MACH 3 R2.48 demo version.

I need help tracing this problem? I don't know if it is LazyCam or MACH 3 related?

Thank You in advance for your help.

Title: Re: LazyCam=>MACH 3 need help
Post by: Chip on November 10, 2007, 02:24:39 AM

Hi, Gbecerra

MachLic.data-file, $160.00 Removes the 500 or 1000 line limit from Mach depending on version and turns on some other items, I don't have a list.

LazyLic.data-file, $75.00 allows offsetting, pocketing and turn features.

Thanks, Chip

Title: Re: LazyCam=>MACH 3 need help
Post by: buddy on February 27, 2008, 01:58:08 PM

I  can only get about 600 lines of G-code to Mach 3. In Mach 3 I can't  find the Mach 3.exe file. I this my problem, or what do I need to do. Thks. Don



i

Title: Re: LazyCam=>MACH 3 need help
Post by: Chip on February 27, 2008, 03:03:51 PM

Hi, Don

If you don't have a Mach3 license, "MachLic.data-file" in C:\Mach3 folder, You'll only be able to run 500 lines of code.

Thanks, Chip