Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: GEdward on March 16, 2023, 08:37:51 PM

Title: Mach3 not saving fixture settings
Post by: GEdward on March 16, 2023, 08:37:51 PM

Mach3 is not saving axis positions when closing out.  It has worked fine for 6 or so years that I have been using this program.  I loaded a new profile and everything, so far anyway, has worked normal.  It is kind of important for this feature to work as many of my projects run over three or four work days.

Ed

Title: Re: Mach3 not saving fixture settings
Post by: TPS on March 17, 2023, 04:11:47 AM

Config -> General Config -> Axis DRO properties -> Persistent Offsets

Title: Re: Mach3 not saving fixture settings
Post by: GEdward on March 17, 2023, 01:35:35 PM

Thanks, TPS.  Persistent offsets is checked.  Persistent DROs is not checked.  Optional offset save is checked.  I guess I'll check/uncheck until it works.

Ed