Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: daniba73 on March 09, 2023, 02:00:53 AM

Title: X wear offset strange behaviour_Mach4 4.2.0.5036 Lathe version
Post by: daniba73 on March 09, 2023, 02:00:53 AM

I tried build 4.2.0.5036 in Lathe version.
I immediately noticed this problem on the DRO X wear offset.
it is no longer possible to enter the value directly.
plus this swings...

Title: Re: X wear offset strange behaviour_Mach4 4.2.0.5036 Lathe version
Post by: exadas on March 09, 2023, 02:03:55 PM

I have sent a message to the guys from Mach4 and they said that they will fix it.

Title: Re: X wear offset strange behaviour_Mach4 4.2.0.5036 Lathe version
Post by: daniba73 on March 09, 2023, 03:30:40 PM

Ok thank you!

Title: Re: X wear offset strange behaviour_Mach4 4.2.0.5036 Lathe version
Post by: daniba73 on March 18, 2023, 01:45:55 PM

will i have to wait for new version?