Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: JtheB on February 18, 2023, 12:56:54 PM

Title: MTC with ATC
Post by: JtheB on February 18, 2023, 12:56:54 PM
I have my Avid Pro set up with an S30 spindle and the ATC is working as it should.
MTC position is established and working as it should.
How does one change the "Current Tool" in Mach4 without initiating the ATC procedure?
Is there a specific MDI command I can use?

Thanks